Samsung Galaxy Note 7- The reason of its battery to explode
There have been news lately about Galaxy Note 7 Samsung battery explosions. In Perth Sydney hotel the explosion caused a damage of $1800. Now the Qantas, Jetstar, Virgin Australia, Tiger Airways banned Samsung’s Galaxy Note 7 usage as well as charging on flights over concerns that their batteries could explode or catch fire.
Samsung Australia recalled that 51,060 Galaxy Note 7 smartphones, after its parent company found some of the batteries have exploded or caught fire. It subsequently stopped all sales of the Galaxy Note 7 and is offering customers replacements.
There were 35 instances of Note 7s catching fire or exploding till now. Two of these were in Australia, including one in Perth where a man’s phone was scorched as he slept in his hotel room.
Samsung has sold about 2.5 million Note 7s around the world, with an estimated one in 42,000 units at risk of having a faulty battery.
According to experts though the battery failures are rare but if it does then it certainly affects the reputation of the brand or product. Like many rechargeable devices, phones use lithium-ion cells. But what makes these batteries great at powering gadgets also makes them vulnerable to catching fire. They are so energy-dense and can operate under such high power that they can combust in a particularly catastrophic way.
Overheating causes explosion. Overheating is obviously driven by temperature rise. This can be due to the environment, such as a hot car in summer, or through heat transferred to a battery from another component inside the phone. Heating can also begin within a battery itself, which is what’s behind the “battery cell issue” in Samsung’s Note 7.
One cause of combustion is a problem with the “battery management system” that monitors the electrical current and normally tells a chip inside the phone to stop the current once a battery is fully charged. If either the system or chip is faulty, a battery can enter a state of “overcharge”.
The battery can continue to charge and can become even more unstable and eventually just burst into flames itself, without any kind of external heating.
Phones don’t contain fans or the liquid cooling mechanism you find in a gaming PC or electric vehicle, so heat must radiate out into the surroundings. If that doesn’t happen, heat is generated faster than it can be dissipated or lost.
When a battery reaches about 100ºC (200ºF), its materials start to break down, triggering a chemical chain reaction that releases its own energy. This accelerates the warming and leads to a snowball effect — a process called “thermal runaway”.
This snowball effect happens so fast that, within a second, the entire cell goes from being intact to being completely destroyed
The heat spread thus triggers the catastrophic failure that causes explosions. The researches in Pail Shearing’s lab at University College London (UCL) simulated a range of operating conditions up to an abnormal 300ºC (over 500ºF) and used thermal imaging to see what happens during thermal runaway. The UCL team also employed high-frequency X-rays to create 3D images of the aftermath.
Lithium-ion cells are made-up of multiple layers, each consisting of a positive and a negative electrode, separated by an insulator. During charging, lithium ions flow from positive to negative, and ions return to the positive electrode as the battery drains.
When materials inside a cell move around, the electrically insulating layer that separates electrodes can tear, causing a short-circuit that creates a spark. Even the tiniest spark inside a battery is enough to initiate the thermal runaway process.
Lithium ions are carried by an electrolyte solution, which is a volatile liquid. The X-ray snapshots reveal that when heated, electrolytes produce gas bubbles that causes a cell to lose structural integrity and can create the short circuit. His videos show that heat spreads across each electrode layer and between layers until the entire battery gets too hot.
The thin, rectangular battery inside a phone has repeating layers of electrodes, which resembles the pages of a notepad, whereas layers in cylindrical cell (like a standard AA battery) are rolled-up like a newspaper. Thermal runaway is similar in both arrangements.
Rectangular batteries are more prone to failure compared to cylindrical cells because the latter usually have a central support that helps prevent internal layers from deforming, as well as a “rupture disc” that will cut-off the current when stretched. Phones don’t have such secondary fail-safes because small size is a desirable feature.
Batteries aren’t as safe as they could be, partly because scientists must cater to the demands of manufacturers, who prefer high performance but less stable cells.
The UCL team is currently working with NASA to develop devices that deliberately cause a short circuit at a known location. This has enabled the researchers to build a map that predicts how heat spreads through a cell. Chemical engineering could help the phone industry reduce the risk of battery failure in future and this can be used by the industry to try and improve their designs and to prevent the worst-case scenario of the really most catastrophic failures.